GCKaMaara
04-07 04:52 PM
I am planning to go on a Hawaii cruise on the Norwegian Cruise line ship (Pride of America) which is registered in the US. My H1-B visa has expired but my I-94 is valid. The Cruise ship only visits islands in Hawaii and embarks/disembarks in Hawaii.
Do I need to worry about my visa stamping or just the Passport with valid I-94 and drivers license should suffice?
Any help will be greatly appreciated!
Call me stupid but I thought Hawaii is part of US only.
Do I need to worry about my visa stamping or just the Passport with valid I-94 and drivers license should suffice?
Any help will be greatly appreciated!
Call me stupid but I thought Hawaii is part of US only.
wallpaper Série Tattoo Pied
banta4u
07-13 04:23 PM
Looks like the PERMANENT SOLUTION was to allow all applicants to apply for AOS....but it's losing ground, it seems...
Looks like July 485 applications will be accepted soon....from the looks of it USCIS is admitting it's mistakes...
http://blogs.ilw.com/gregsiskind/
>>>>>>>>>>>>
BATTLE TAKING PLACE AT CIS OVER PRECISE REMEDY IN THE VISA BULLETIN MESS
I have been reporting on plans for USCIS to make a major announcement today or Monday regarding fixing the mess created by USCIS' not quite valid claim to have fully processed all remaining cases for the fiscal year.
Apparently, there are multiple camps arguing for different solutions, according to more than one of my sources with at least one side arguing for providing interim work and travel benefits without a visa number being available (the "permanent" solution), another arguing for only accepting adjustment applications for July and other possibilities as well. The "permanent" solution camp has apparently lost some ground since yesterday.
An announcement today is still possible which might make sense given the holding up of publishing of the Visa Bulletin and the deadline imposed by Congresswoman Lofgren. But obviously USCIS has to decide what it wants to do, check the legality, then draft and release a press statement.
I'll update you as I learn more.
Looks like July 485 applications will be accepted soon....from the looks of it USCIS is admitting it's mistakes...
http://blogs.ilw.com/gregsiskind/
>>>>>>>>>>>>
BATTLE TAKING PLACE AT CIS OVER PRECISE REMEDY IN THE VISA BULLETIN MESS
I have been reporting on plans for USCIS to make a major announcement today or Monday regarding fixing the mess created by USCIS' not quite valid claim to have fully processed all remaining cases for the fiscal year.
Apparently, there are multiple camps arguing for different solutions, according to more than one of my sources with at least one side arguing for providing interim work and travel benefits without a visa number being available (the "permanent" solution), another arguing for only accepting adjustment applications for July and other possibilities as well. The "permanent" solution camp has apparently lost some ground since yesterday.
An announcement today is still possible which might make sense given the holding up of publishing of the Visa Bulletin and the deadline imposed by Congresswoman Lofgren. But obviously USCIS has to decide what it wants to do, check the legality, then draft and release a press statement.
I'll update you as I learn more.
SunnySurya
08-04 09:35 AM
I came to know of a case where this gentelman who has PD of Nov 2002 EB2 has his case pending at Nebraska for a really long time. His Name check and other formalities were cleared and no body was sure the reason for the hold up. He had numerous infopass appointments as well as written to various lawmakers etc... After getting tired of doing all that he decided to take 15 days off from work. And do you know where did he go:
He went to Lincoln, Nebraska.
The story goes that every day he would stand in front of the office and he was turned back but he continued to sit in the lobby requesting to see the director. Finally his persitence paid off. On 15th day he was granted half an hour with the Director and he presented his case. In few hours he saw his 485 status changed to approved.
So the persitence really do pay. I don't know the name of this gentleman but if you are reading this post please provide some more details. Hats off to you.
He went to Lincoln, Nebraska.
The story goes that every day he would stand in front of the office and he was turned back but he continued to sit in the lobby requesting to see the director. Finally his persitence paid off. On 15th day he was granted half an hour with the Director and he presented his case. In few hours he saw his 485 status changed to approved.
So the persitence really do pay. I don't know the name of this gentleman but if you are reading this post please provide some more details. Hats off to you.
2011 Bull Tattoo Design 2011
brad_sk2
04-15 11:51 AM
Congratulations!
more...
vishwak
08-20 02:23 PM
goel I know that, I have already done that twice in previous stampings at Canada. Each time I went a day before to the Scotia branch prior to my appointment. What concerns me is this statement.
If you have already scheduled to attend an appointment through NVARS, please pay your MRV fee prior to September 1, 2010
See my point?
Btw this just came out I think yesterday.
YOU NEED TO PAY FEE BEFORE SEP 1ST. SO GO TO SOCTIA BANK BEFORE 32-AUG AND PYA FEE. Take the Receipt with you when you attend interview.
Thats the mean I get.
If you have already scheduled to attend an appointment through NVARS, please pay your MRV fee prior to September 1, 2010
See my point?
Btw this just came out I think yesterday.
YOU NEED TO PAY FEE BEFORE SEP 1ST. SO GO TO SOCTIA BANK BEFORE 32-AUG AND PYA FEE. Take the Receipt with you when you attend interview.
Thats the mean I get.
rockstart
10-18 12:31 PM
I have submited my FP all 10 fingers when I was working for my past employer which was a financial company dealing in Credit Cards business. They collect it when they issue badge as part of security and its a federal requirement for financial company. I am not sure if they maintain it internally or send it to FBI for storage does any one have any info?
more...
tonyHK12
04-27 01:21 PM
Unless there is a formal document like Unauthorized Immigrants Pay Taxes, Too | Immigration Policy Center (http://www.immigrationpolicy.org/just-facts/unauthorized-immigrants-pay-taxes-too)
http://www.immigrationpolicy.org/sites/default/files/docs/Tax_Contributions_by_Unauthorized_Immigrants_04181 1.pdf
a post has no significance. If you wish to work on such a study, it would be make the arguments stronger. It is something some volunteers can take up as an action item.
Yes it would be a good idea to debunk these posts and similar ones and at the same time compare with employment based immigrants. That should be a good way to get heard, since illegals are always in the news.
I'll check for volunteers on the action item
Blog Feeds
Fear Mongers are the ones who are relying more on Govt for the social safety net benefits,
blog feeds is an attorneys blog
http://www.immigrationpolicy.org/sites/default/files/docs/Tax_Contributions_by_Unauthorized_Immigrants_04181 1.pdf
a post has no significance. If you wish to work on such a study, it would be make the arguments stronger. It is something some volunteers can take up as an action item.
Yes it would be a good idea to debunk these posts and similar ones and at the same time compare with employment based immigrants. That should be a good way to get heard, since illegals are always in the news.
I'll check for volunteers on the action item
Blog Feeds
Fear Mongers are the ones who are relying more on Govt for the social safety net benefits,
blog feeds is an attorneys blog
2010 Tattoo Pied. tatouage pied
GCwaitforever
04-11 11:47 AM
Congratulations on getting GC. You are out of this hellhole.
more...
meridiani.planum
11-19 02:21 AM
inline...
I have H1 visa and my company started processing my GG. They published some ads, and in August applied for the LC. It turned out that they used EB3. They said that LC would be ready by February next year. Then it will take 4 years minimum for other steps. I was very surprised that I was EB3 but not EB2.
I have couple of questions:
1. How long does it take if to process it using EB3... 4 years, 5 years?
--its going to take 2-3 years before you can file,then another couple of years perhaps. So yea 4-5 years
2. How long does it take if to process it using EB2? I am from Russia.
--if EB2 remains current (it has inthe past, andwill likely remain current in the future also) say an year or 18 months. Thats been the typical time, and also processing dates cameout today and NSC is for instance claiming they are now doing July 2007 cases
3. Is it possible to switch to EB2 somehow?
--u will need to redo the LC stage.
4. If I apply one more time now using Eb2, would it be faster? I will lose time for LC processing.
--see below
5. At what step of GC processing can I change a compamy that I work for?
--6 months after filing the I-485. safer to wait for teh I140 to also be approved by that point. (the law says your I-140 must be 'approvable'. I-140s are taking 12-18 months
If I were in your place, I would drop this LC and file the one in EB2 asap.
I have H1 visa and my company started processing my GG. They published some ads, and in August applied for the LC. It turned out that they used EB3. They said that LC would be ready by February next year. Then it will take 4 years minimum for other steps. I was very surprised that I was EB3 but not EB2.
I have couple of questions:
1. How long does it take if to process it using EB3... 4 years, 5 years?
--its going to take 2-3 years before you can file,then another couple of years perhaps. So yea 4-5 years
2. How long does it take if to process it using EB2? I am from Russia.
--if EB2 remains current (it has inthe past, andwill likely remain current in the future also) say an year or 18 months. Thats been the typical time, and also processing dates cameout today and NSC is for instance claiming they are now doing July 2007 cases
3. Is it possible to switch to EB2 somehow?
--u will need to redo the LC stage.
4. If I apply one more time now using Eb2, would it be faster? I will lose time for LC processing.
--see below
5. At what step of GC processing can I change a compamy that I work for?
--6 months after filing the I-485. safer to wait for teh I140 to also be approved by that point. (the law says your I-140 must be 'approvable'. I-140s are taking 12-18 months
If I were in your place, I would drop this LC and file the one in EB2 asap.
hair Tattoo Autour Cheville
VisaHelp
07-26 09:27 AM
Sure. It was an H1B transfer application. So, the RFE asked for pay stubs with company A. Also asked, if applicable, for company B's pay stubs. W2s for the whole time I was in H1 status. And my last six tax returns.
Could you please detailed RFE? It is difficult to suggest without the RFE details.
____________________
Not a legal advice.
Could you please detailed RFE? It is difficult to suggest without the RFE details.
____________________
Not a legal advice.
more...
mhathi
08-22 09:11 AM
Done!
hot Sirene Pied Tattoo.
kirupa
08-20 12:36 PM
Hi cakewalkr7!
For your first question, the reason is that when animating, the height of an element is not what gets changed by default when you use the adorners. A RenderTransform with ScaleY changes instead.
What you want to do is set the actual Height property to 0 on the properties inspector at a given keyframe. That should give you the effect that you want. Here is a small XAML snippet that allows you to do that:
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid"/>
<Grid Height="100" Background="#FF00B3FF"/>
</StackPanel>
</Grid>
For your second question, there isn't an easy way to do that without writing code. This tutorial should help: http://www.kirupa.com/blend_wpf/modifying_animations_pg1.htm What you would vary is the Storyboard.TargetName, and that would point to the appropriate Grid that you are interested in animating.
Let me know if that helps or if you need more info.
Cheers!
Kirupa :)
For your first question, the reason is that when animating, the height of an element is not what gets changed by default when you use the adorners. A RenderTransform with ScaleY changes instead.
What you want to do is set the actual Height property to 0 on the properties inspector at a given keyframe. That should give you the effect that you want. Here is a small XAML snippet that allows you to do that:
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid"/>
<Grid Height="100" Background="#FF00B3FF"/>
</StackPanel>
</Grid>
For your second question, there isn't an easy way to do that without writing code. This tutorial should help: http://www.kirupa.com/blend_wpf/modifying_animations_pg1.htm What you would vary is the Storyboard.TargetName, and that would point to the appropriate Grid that you are interested in animating.
Let me know if that helps or if you need more info.
Cheers!
Kirupa :)
more...
house pied wagtail mythology
lostinbeta
10-02 12:52 PM
That is great eilsoe! You have much talent with Photoshop=)
tattoo Feet - SLink Jolie Pied
SNLive999
06-10 10:51 AM
Thanks Dhun Dhun....bumping it.....
more...
pictures Tattoo Pied Pour Homme.
thomachan72
12-21 01:18 PM
Wiring the money is the best and safest option for large amounts. If you wire it into your NRE then it will not be converted into rupee unless you specifically instruct that to happen. You can hold it in US dollars till the value appreciates.
Usually you can wire it for approx $35 to 40 and it takes about 2 working days.
Usually you can wire it for approx $35 to 40 and it takes about 2 working days.
dresses Gil#39;s Blog: tattoo pied
willIWill
04-30 05:43 PM
Yes one from Mother and one from Father.
You may find a sample by googling.
You may find a sample by googling.
more...
makeup Tatoo Aux Pieds. Tattoo Pied
chanduv23
09-12 03:58 PM
Just like *ranga*, *billa* also has a story.
billa went to Texas A and M for his Mechanical Engineering and then moved into a lucrative job at a world famous oil company in Houston. His company has offered him a permanant job and offered to do his Green Card. But they don't know he will be leaving his job to go to Dubai because of Green Card logjam and uncertaainity that prevails.
Lets help to keep Billa and Ranga in the US. Lets all go to the rally
billa went to Texas A and M for his Mechanical Engineering and then moved into a lucrative job at a world famous oil company in Houston. His company has offered him a permanant job and offered to do his Green Card. But they don't know he will be leaving his job to go to Dubai because of Green Card logjam and uncertaainity that prevails.
Lets help to keep Billa and Ranga in the US. Lets all go to the rally
girlfriend Tattoo Pied Pour Homme.
chanduv23
01-24 10:22 AM
Tri Staters - please make it to this social event.
hairstyles Tattoo Pieds Tribal Feminin.
lonedesi
05-03 06:37 AM
I think it makes a lot of sense in what Janakp is conveying. These online petitions are no good and will achieve nothing. It is better we meet our congressmen/senators and convey these issues to them or their staff.
lazycis
01-15 11:04 AM
See also
http://pubweb.fdbl.com/news1.nsf/d3d98eadd391e98486256aa90014645f/c93cb749b8d8eb65852569bd00730824?OpenDocument
On December 20, 2000, the Department of Labor (DOL) published interim finalregulations pertaining to H-1B Labor Condition Applications (LCAs) and implementing the American Competitiveness and Workforce Improvement Act of 1998 (ACWIA) (65 Fed Reg. 80109-80208). The lengthy rule, titled "Labor Condition Applications and Requirements for Employers Using Nonimmigrants on H-1B Visas in Specialty Occupations and as Fashion Models; Labor Certification Process for Permanent Employment of Aliens in the United States," generally will take effect January 19, 2001
The rule further clarifies that, in some cases, it is a violation of the wage obligations if an H-1B worker is required to reimburse or pay for attorney fees or other costs associated with the preparation and filing of the H-1B petition. Such payments are allowed only if the H-1Bs wage rate less these payments is greater than the required wage rate as listed on the LCA. If such payments would cause the H-1B's wages to fall below the required rate, they are prohibited. An H-1B may, however, be required to pay for certain costs, not considered the employer's expense, in connection with obtaining the H-1B visa. These include translation and visa fees.
http://pubweb.fdbl.com/news1.nsf/d3d98eadd391e98486256aa90014645f/c93cb749b8d8eb65852569bd00730824?OpenDocument
On December 20, 2000, the Department of Labor (DOL) published interim finalregulations pertaining to H-1B Labor Condition Applications (LCAs) and implementing the American Competitiveness and Workforce Improvement Act of 1998 (ACWIA) (65 Fed Reg. 80109-80208). The lengthy rule, titled "Labor Condition Applications and Requirements for Employers Using Nonimmigrants on H-1B Visas in Specialty Occupations and as Fashion Models; Labor Certification Process for Permanent Employment of Aliens in the United States," generally will take effect January 19, 2001
The rule further clarifies that, in some cases, it is a violation of the wage obligations if an H-1B worker is required to reimburse or pay for attorney fees or other costs associated with the preparation and filing of the H-1B petition. Such payments are allowed only if the H-1Bs wage rate less these payments is greater than the required wage rate as listed on the LCA. If such payments would cause the H-1B's wages to fall below the required rate, they are prohibited. An H-1B may, however, be required to pay for certain costs, not considered the employer's expense, in connection with obtaining the H-1B visa. These include translation and visa fees.
Bobby Digital
May 19th, 2005, 09:24 AM
J. is right. Manual focus and exposure bracketing are what you need to do. I have a D70 and have learned quite a lot with it, as you will. I take a meter reading in the auto mode and then switch to manual mode enter in the same settings and adjust as needed. Usually with a smaller aperture (larger number).
Hope this helps.
Hope this helps.
No comments:
Post a Comment